i slide iC5 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com lp series miniature snap-in slide switches models a vailable features/benefits ? 6 to 11 amps available ? easy assemblynap--n mounting ? contamination resistantxtended actuator ? positive detent ? rohs compliant typical applications ? small appliances ? outdoor appliances ? portable tools specifications contact rating: q contact material (lp0x, lp2x models: 6 amps @ 125 v ac or 28 v dc; 3 amps @ 250 v ac (ul/csa). (lp7x, lp8x models): 11 amps @ 125/250 v ac (ul/csa).see page i-27 for additional ratings. electrical life: 10,000 make-and-break cycles at full load. insula tion resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. opera ting temperature: -30o to +65? storage temperature: -30o to +85? note: any models supplied with q, b or g contact material ar e rohs compliant. note: specifications and materials listed above ar e for switches with standar d options. for information on specific and custom switches, consult customer service center. build-a-switch t o or der , simply select desir ed option fr om each category and place in the appropriate box. available options are shown and described on pages iC6 and i?C. for additional options not shown in catalog, consult customer service center. materials housing: 6/6 nylon (ul94v-2), black. actuator: glass filled acetal, uv and petroleum resistant, black. contacts: q contact material: copper, silver plated. see page i-27 for additional contact materials. terminals: q contact material: copper, silver plated. see page i-27 for additional contact materials. contact spring: music wire or stainless steel. terminal seal: epoxy. switch function lp22 dpdt, 6 amp lp02 spdt , 6 amp lp81 dpst , 11 amp lp82 dpdt, 11 amp mounting style t2 snap-in panel with tabs (d, l, n markings only) detent 1 with detent actuator c2 black cap c1 whiteca p c3 red cap contact material q silver b gold housing markings none no markings d on-off terminations 03 solder lug with hole
iC6 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com i slide schematic switch function amp rating* model no. no. poles lp series miniature snap-in slide switches switch function actua tor detent mounting style terminal nos. for reference only p anel mounting dim. a c2 black c1 white c3 red actuator cap color option code2 note: actuator finish: gloss. other colors available, consult customer service center. mounting style t2 suitable for markings. see housing markings options. t2 snap-in panel with tabs 1 with detent c1; c2; c3 part number shown: lp22c21s203q .610 (15,49) .090C120 (2,29) (3,05) .598 (15,19) .060C089 (1,52) (2,26) .585 (14,86) .046C059 (1,17) (1,50) .578 (14,68) .030C045 (0,76) (1,14) dim p anel thickness lp22 6 dpdt lp81 11 dpst lp82 11 dpdt dp schema tic switch function amp ra ting* model no. no. poles all models with all options when ordered with ?ontact material. contacts make on side actuator thr own. * for complete contact ratings, see contact materials section, page i-27. sp lp02 6 spdt
i slide iC7 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com lp series miniature snap-in slide switches terminations housing markings cont act ma terial d on-off none no markings 03 solder lug with hole 1 contacts & terminals: copper, with gold plate over nickel plate. 2 contacts & terminals: copper, silver plated (standard with all termination options). 3 contacts & terminals: copper, with gold plate over nickel plate over silver plate. orientation of actuator and terminals. note: housing markings are available with 2?ounting style only. the marking color on all housings with marking options ?s white, standar d. other marking colors are available, consult customer service center. all models with all when ordered with ?ontact material. note: any models supplied with q or b contact material ar e rohs compliant. * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. 0.4 v a max. @20 v ac or dc max. lp0x, lp2x models: 6 amps @ 125 v ac or 28 v dc; 3 amps @ 250 v ac (ul/csa).lp7x, lp8x models: 11 amps @ 125/250 v ac (ul/csa). low level/dry circuit power gold 1 sil ver 2 option code ra tings contact material q b
|
